KOENDERS
BOAT LIFTS – CANTILEVER BOAT LIFT SYSTEM
Koenders cantilever boat lifts offer
you a well designed, durable, affordable, easy to use boat lift system!
You can always spot boats that are not kept on
boat lifts. The boat hull is stained and often will have a substantial
growth of algae, moss and muck. Leaving your boat in the water can have
damaging effects. As a boat sits in the water small electrical currents
are generated that come from different metals on your boat and from neighboring
boats and docks. This galvanic action is called electrolysis. This will
cause pitting and blisters to the boat’s underwater metal parts.
A boat lift can eliminate this type of corrosion. Boat lifts can also
protect your boat from storm waves. It is better to keep your boat up
on a boat lift, than to leave it to bang and rub against a dock. 
Boat Lift Features
and Options:
• Cantilever Boat Lift/3000 lb electric winch with 15’ remote
control
• Cantilever Boat Lift with 2500 lb hand winch with 36" wheel
included
• Winch can be mounted on either side of the lift for easy access
in any location
• The one winch, three pulley cable system is designed to be simple
and trouble free to allow for many years of boating enjoyment
• Boat lifts manufactured with an aluminum frame
• Canopy for Cantilever Boat Lift: 22’ long x 9.5’ wide
• Our boat lift canopy can be adjusted forward or backward as well
as up or down to fit your boat size - choice of colours available
• Full Length easy glide Vinyl/Wood Bunks
• Boat lift comes unassembled and tightly packaged for easy
shipping
• Optional: Canopy, Boat Wheels, Motor Stop
• Weight capacity 3000 lbs. Inside width 108”, outside width
112”, overall length 100”. Lift height 36”
• Leg
adjustment 24”. Weight of lift is 400 lbs
Optional Wheel Kit available for Boat
Lifts and our Boat Docks:
17" diameter x 9 1/2" wide
AQUA-DOCK
Koenders Boat Docks will offer you a strong,
easy to install, attractive boat dock . Our aluminum boat dock
frame and legs give you a maintenance free advantage that will not splinter,
rust or rot and will not warp and crack with age and will retain its strength.
Swimming, sunbathing or fishing Koenders Boat Docks
are ideal. Customize your boat dock or boat ramp adding sections as needed
to achieve the length required.

|


Dock Top Available in:
•Marine White
•Marine Tan
•Marine Grey
|

 |
Koenders Boat Dock Features
• Boat docks available in 10' x 4' wide sections with polypropylene panel top
• Docks have solid aluminum frame (4 3/4" extruded aluminum sides)
• Middle brace in center underneath (2" x 2" x 1/8")
• Cross bracing (1/2" x 1") flat bar
• 1 1/2" x 1 1/2" x 3/16" aluminum legs
• Boat Docks have leg adjustment 6" to 5' (using pins)
• Bottom leg plate on each dock leg make for easy maneuvering (8" x 8")
• Docks use 2 legs per section
• Boat bock sections can be connected together
• Boat dock wheels available (optional)
Polymer Panel Dock Top Features
• Strong & durable - manufactured from hi-impact polypropylene resin, stays cool, no splinters, no rot
• Maintenance free - UV stabilized for long life
• Solid color throughout, no need to paint or stain
• Comfortable - engineered soft feel for bare feet
• Designed for safety - recessed attachement holes
• Large surface opening - provide efficient drainage of water, sand & minimize water uplift on dock
• Aqua-Dek panels are designed to allow light to pass through which protects the environment
• Large 2' x 4' overlapping panel provides for easy installation while reducing labor
Contact us for any of your custom boat dock or stationary ramps requirements
|